Everyone

KNP앱연구소

KitKat

In the Android All-in-One Unit using the RockChip CPU (RK3188 / PX3 / PX5 / PX6), using the steering wheel remote control
This app is designed to help you control your system easily and help you to drive safely.

(*) Before MyMTCService was released, You can download a new firmware ROM settings.ini here
- https://drive.google.com/open?id=1IuF_zlz4kicJlT6iYWGiG3hJ6-KZUPje

1) copy to /sdcard/mymtcservice/settings/
2) Settings -> System settings -> Select ROM settings File

(*) Function list

1. Use the remote control to control the start / next / previous / pause / stop commands for the music program.
    - The following players are controlled by dedicated commands. (Will be added on a continuous basis upon request.)
=> JetAudio(plus), PowerAMP
- Other players can be controlled using media signals. 
    - It is possible to play instantly with the remote control handle as a representative player designation. (Apps with some unsupported apps can only run)

2. It shows the playback information about the music being played by using the floating widget.
- You can open the player by double-click.
    - Player support for most standard music information
- It also supports the radio frequency information being played.
- Default music players are supported if xposed-mtc-music is installed. (android 4.4)

3. You can run / switch frequently used apps with handle remote control by providing favorite list function using pop-up window.
    - Pop up / move forward with MODE key
    - Move to front / back with volume key, selectable with MUTE key

4. Volume control function and replace the volume bar.
    - Volume control at boot
    - Circular volume bar for volume control (RED, BLUE, GREEN theme selection applied)

5. Screen brightness control
- Control screen brightness at boot
- Use the sunrise / sunset times to automatically control screen brightness.
    - Automatic screen brightness control for rear camera operation
      (*) Especially when you set the screen dark at night, the rear camera is also dark.

6. Automatically launch the navigation app
    - Network connection (WIFI or 3G) automatically executes the navigation program.
     (Since it can not be used normally if the network is not connected)

7. When the last program executed at boot time
    - This will remove some of the inconvenient features you know only those who have used it.

8. Front camera automatic switching function
- Displays the front camera for 10 seconds after using the rear camera with the AV-IN function.

9. Added OBD connection function (function in xposed-mtc-manager)
- Thank you MVG-V70

(*) System Requirements
1. It works only with some custom ROMs. (Such as Malaysk and Hak9k)
2. Requires root authority. (Required for controlling some music programs)
3. Supports Android 4.x, 5.x, 6.x, 7.x, 8.x,9.x
4. Only devices with MCU version MTC series (MTCB / MTCC / MTCD / MTCE) are available.
5. Xposed Installer must be installed.
6. Notification access must be enabled.
7. Use Location Services. (Used for brightness control according to sunrise / sunset time)
8. Accessibility rights must be set.

(*) Basic button interlock function
1. NEXT / PREVIOUS: Move to next / previous music songs, Act as channel flipping on genuine radio, Auto play / play music (if no apps work)
2. VOL UP / DOWN: Volume up / down control, forward / back in favorite window
3. Mode (MODE): Run your favorite app and move forward
4. MUTE: Music / Radio pause

(*) Required privilege
- INTERNET: Use to check the network availability.
- SYSTEM_ALERT_WINDOW: Use to display favorite, music playback information.
- Accessibility: Control music player
- WRITE_SETTINGS : Used to adjust the brightness of the screen.
- ACCESS_FINE_LOCATION: Use to find the sunrise / sunset time.
- WRITE_EXTERNAL_STORAGE: Used to read / write environment setting values
- ACCESS_WIFI_STATE / CHANGE_WIFI_STATE : Used to change WIFI configuration.
在使用RockChip CPU（RK3188 / PX3 / PX5 / PX6）的Android多合一单元中，使用方向盘遥控器
该应用程序旨在帮助您轻松控制系统并安全驾驶。

（*）在发布MyMTCService之前，您可以在此处下载新的固件ROM settings.ini。
-https://drive.google.com/open?id=1IuF_zlz4kicJlT6iYWGiG3hJ6-KZUPje

1）复制到/ sdcard / mymtcservice / settings /
2）设置->系统设置->选择ROM设置文件

（*）功能清单

1.使用遥控器控制音乐程序的开始/下一个/上一个/暂停/停止命令。
-以下播放器由专用命令控制。 （将根据要求连续添加。）
      => JetAudio（plus），PowerAMP
    -可以使用媒体信号控制其他播放器。
-可以用遥控器手柄立即进行播放，作为代表播放器的名称。 （带有某些不受支持的应用程序的应用程序只能运行）

2.它显示有关使用浮动小部件播放的音乐的播放信息。
    -您可以双击打开播放器。
-播放器支持大多数标准音乐信息
    -它还支持正在播放的射频信息。
    -如果安装了xposed-mtc-music，则支持默认音乐播放器。 （Android 4.4）

3.通过使用弹出窗口提供收藏夹列表功能，可以运行/切换具有遥控功能的常用应用程序。
-弹出/用MODE键前进
-使用音量键向前/向后移动，使用静音键可选择

4.音量控制功能并更换音量条。
-启动时的音量控制
-用于音量控制的圆形音量条（应用了红色，蓝色，绿色主题选择）

5.屏幕亮度控制
    -在启动时控制屏幕亮度
    -使用日出/日落时间自动控制屏幕亮度。
-自动屏幕亮度控制，用于后置摄像头操作
（*）尤其是在晚上将屏幕设置为黑暗时，后置摄像头也会变暗。

6.自动启动导航应用
-网络连接（WIFI或3G）自动执行导航程序。
（由于如果未连接网络，则无法正常使用）

7.当最后一个程序在启动时执行
-这将删除一些您只有使用过的人才知道的不便之处。

8.前置摄像头自动切换功能
    -使用具有AV-IN功能的后置摄像头后，显示前摄像头10秒钟。

9.添加了OBD连接功能（xposed-mtc-manager中的功能）
   -谢谢MVG-V70

（*） 系统要求
1.它仅适用于某些自定义ROM。 （例如Malaysk和Hak9k）
2.需要root权限。 （控制某些音乐程序所需）
3.支持Android 4.x，5.x，6.x，7.x，8.x，9.x
4.仅具有MTC版本MTC系列（MTCB / MTCC / MTCD / MTCE）的设备可用。
5.必须安装Xposed安装程序。
6.必须启用通知访问。
7.使用定位服务。 （用于根据日出/日落时间进行亮度控制）
8.必须设置无障碍权限。

（*）基本按钮互锁功能
1.下一首/上一首：移至下一首/上一首音乐歌曲，充当正版收音机上的频道翻转，自动播放/播放音乐（如果没有应用程序运行）
2. VOL UP / DOWN：提高音量/降低音量，在收藏夹窗口中前进/后退
3.模式（MODE）：运行您喜欢的应用程序并继续前进
4.静音：音乐/广播暂停

（*）所需特权
-互联网：用于检查网络可用性。
-SYSTEM_ALERT_WINDOW：用于显示收藏的音乐播放信息。
-辅助功能：控制音乐播放器
-WRITE_SETTINGS：用于调整屏幕的亮度。
-ACCESS_FINE_LOCATION：用于查找日出/日落时间。
-WRITE_EXTERNAL_STORAGE：用于读取/写入环境设置值
-ACCESS_WIFI_STATE / CHANGE_WIFI_STATE：用于更改WIFI配置。


\u5b83\u53ef\u4ee5\u5e2e\u52a9\u60a8\u8f7b\u677e\u5730\u4f7f\u7528\u745e\u82af\u5faeCPU\u63a7\u5236Android\u7684\u6240\u6709\u529f\u80fd\u4e8e\u4e00\u8eab\u7684\u5355\u4f4d

[RockChip] MyMTCService (RK3188 / PX3 / PX5 / PX6)

[RockChip] MyMTCService (RK3188 / PX3 / PX5 / PX6)的最新版本

其他版本